蘇州電子壓力機廠家
*適用范圍： Scope of Application
適用于各種材料的沖孔、壓印、整形、鉚接、彎曲、剪切、拉伸和各種小型零部件的壓裝、裝配
Embossing ,forming,shall draw,shaping ａnd pressure assembling of metal or non-metal parts,press fitting of motor rotors ａnd stators,electronic connectors ａnd electric parts,pressing of glasses,locked modes ａnd hardware prats,etc
第二：電子壓力機的優點如下
伺服壓力機的優點：
一、精確控制設備的大壓裝出力，實時顯示當前設備出力;
二、以0.01MM為單位實時顯示當前壓裝位置;
三、實時描繪力與位移的壓裝曲線;
四、伺服壓力機可對終壓裝位置進行對比，以檢測是否壓入到位;
五、可存儲多套設備的壓裝參數，以方便下次使用調出;
六、可對壓裝到數據進行存儲。
七．我們的設備是一款智能壓機，位移傳感器小顯示單位為0.01MM，位移壓裝精度±0.01MM，設備壓力控制精度為：總量程的1%，小顯示單位為0.1kgf
Main Advantages of NC Hydraulic Press:
1, Precise control of the pressure in the pressing, and the current pressure will show on the screen;
2, The current position of the press head will show on the screen by 0.01mm unit.
3, The function curve between pressure and position will display on the screen in real time.
4, Position checking can ensure the press head arrive at the right position.
5, Data memory function can store multiple sets of pressing data, which can be used when the next pressing job.
6.The press is intelligent equipment, its pressure control accuracy is 3% in the total process, the smallest display unit is 0.1kgf for pressure, and 0.01mm for position. Position accuracy is ±0.1mm in the pressing.
蘇州電子壓力機廠家設備規格和技術參數
Machine Specification ａnd Technical Parameter
項 目Project | 伺服壓力機技術參數series high presicion servo press machine |
公稱壓力Nominal force Out put(T) | 15 |
理論出力 Theory output(Ton) | 0.3-15 |
行程 Stroke(mm) | 400 |
快速下降速度 Cylinder rate of descent(mm/s) | 0.1-100 |
加壓速度Work of Down (mm/s) | 0.1-30 |
上升速度 Cylinder ascending velocity(mm/s) | 0.1-100 |