Table 10-5. Bit Assignments when used in 8-bit data (S = 2) Bit DS90CR285 Pin Name Bit DS90CR285 Pin Name Bit DS90CR285 Pin Name Bit DS90CR285 Pin Name ODD-00 Tx0 ODD-07 Tx5 NC Tx19 EVEN-05 Tx14 ODD-01 Tx1 EVEN-00 Tx7 NC Tx20 EVEN-06 Tx10 ODD-02 Tx2 EVEN-01 Tx8 NC Tx21 EVEN-07 Tx11 ODD-03 Tx3 EVEN-02 Tx9 NC Tx22 STROBE TxCLK ODD-04 Tx4 EVEN-03 Tx12 NC Tx16 LVAL Tx24 ODD-05 Tx6 NC Tx15 NC Tx17 ODD-06 Tx27 NC Tx18 EVEN-04 Tx13
Mechanical Characteristics 11.1 Weight The camera typical weight (without lens nor lens adapter) is 220 g/7.7 ounces (typical). 11.2 Dimensions The camera dimensions (without lens) are W = 56 mm, H = 60 mm, L = 39.4 mm. Figure 11-1. Mechanical Box Drawing and Dimensions 15 15 6 39.4 12 4 x 2 holes M4 (on the 4 sides) 56 48 60 52 Sensor 1st pixel y = 30 ± 0.05 ? 42 H7 ? 46 z = 10.3 ± 0.03 Optical sensor plane to front face 1 3 x M2.5 at 120° x = refer to "Mechanical Mounting Reference" Reference mounting plane Reference mounting plane Reference mounting plan
Mechanical Mounting Reference The front panel mechanical part is designed to support the mounting of the camera. On this mechanical part, three surfaces are considered as mounting reference surface: i.e. the distance between these surfaces and the first active pixel are known very precisely (better than ±50 μm). 11.4 Sensor Alignment Figure 11-2. Sensor Alignment Diagram 11.5 Lens Mounting (Lens Not Supplied) The camera can be provided with three different lens adapter, corresponding to three different options. The user has to selected the correct adapter. The following table gives recommendations according to the sensor size. Table 11-1. Mechanical Mounting Reference Number of Pixels 512 1024 2048 4096 x with 14 μm sensor (nm) 24.416 20.832 13.664 – x with 10 μm sensor (nm) – 22.880 17.760 7.520 Y axis Z axis X axis X, Y plans x + ?x y + ?y z + ?z ?θx, y Mechanical reference point Mechanical reference point Active area
Ordering Code Table 11-2. Lens Mounting Number of Pixels 512/14 μm 1024/10 μm 1024/14 μm 2048/10 μm 2048/14 μm 4096/10 μm C mount OK OK ~OK(1) ~OK(1) not usable not usable F mount OK OK OK OK OK OK Table 12-1. Ordering Code Part Number Resolution Pixels Size Description AT71M2CL1010-BA0 1K 10 μm AViiVA M2 CL 1010 AT71M2CL2010-BA0 2K 10 μm AViiVA M2 CL 2010 AT71M2CL4010-BA0 4K 10 μm AViiVA M2 CL 4010 AT71M2CL0514-BA0 512 14 μm AViiVA M2 CL 0514 AT71M2CL1014-BA0 1K 14 μm AViiVA M2 CL 1014 AT71M2CL2014-BA0 2K 14 μm AViiVA M2 CL 2014 AT71KFPAVIVA-ABA – – F mount (NIKON) AT71KFPAVIVA-AKA – – T2 mount (M42 x 0.75) AT71KFPAAVIVA-ADA – – M42 x 1 mount AT71KFPAVIVA-ACA – – C mount AT71KAVIVAP2C0D3A0 – – Cables kit: 10m power supply and 5m Camera Link cables