Steamix^® Steam and Water Hose Stations – Standard

Steamix is designed to improve efficiency and reduce risk when mixing steam and water for washdown. When your process demands high washdown temperatures, adjusting the mix of steam and water becomes much more difficult and dangerous. With the older style dual-globe valve mixing “Y,” it is too easy to introduce too much steam—with risky consequences for your personnel. Here’s why it’s no problem with Steamix.

The Steamix Steam and Water Hose Stations – Standard series is supplied fully assembled and pressure tested in the following configurations. Go to the menu bar above for specific detail on each model:

Steamix Model 2030 is a steam/water mixing valve of brass/stainless steel construction.

Steamix Model 2031 is a steam/water mixing valve of brass/stainless steel construction. The valve is supplied as standard with 3/4" inlet union connections with integral strainers, an outlet ball valve for flow control and an outlet dial thermometer. The unit is supplied fully assembled, pressure-tested.

Steamix Model 2032 is a steam/water mixing valve of brass/stainless steel construction. The valve is supplied as standard with 3/4" inlet union connections with integral strainers, an outlet ball valve for flow control and an outlet dial thermometer. The unit is supplied fully assembled, pressure-tested and installed on a stainless steel hose rack.

Steamix Model 2033 also includes a stainless steel dual-scale outlet thermometer, 25 feet of “safety yellow” washdown hose rated for 400 psi (28 bar) and 400˚F (88˚C), rubber cushioned spray nozzle with, swivel adapter, a stainless steel nozzle hook.

Steamix Model 2033 is a steam/water mixing valve of brass/stainless steel construction. The valve is supplied as standard with 3/4" inlet union connections with integral strainers, an outlet ball valve for flow control and an outlet dial thermometer. The unit is supplied fully assembled, pressure-tested and installed on a stainless steel hose rack.

Safety

• In the event of either a complete failure of the inlet cold-water supply or a reduction in cold-water pressure to below 20 (+/-5) psi (1.4 bar), STEAMIX will respond with a complete shutdown of outlet flow.
• If there is a structural failure of the primary operating component (diaphragm), STEAMIX will “fail safe” to cold water.
• To prevent over-temperature selection by the user and the potential for overheated water and flash steam presentation common with other types of hose stations, STEAMIX is supplied with a single-temperature locking set.